NSN 5305-01-135-7260
Bolt Stove
Between 0.407 inches and 0.469 inches fastener length, button head style, between 0.427 inches and 0.447 inches head diameter, head height: between 0.089 inches and 0.099 inches .
Manufacturer part number AAS2525-19 for national stock number 5305011357260.
Datasheet
-
Product description
Machine Screw NSN 5305-01-135-7260.
-
MPN or Model
AAS2525-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.329 inches and 0.423 inches -
Fastener Length
Between 0.407 inches and 0.469 inches -
Head Style
Button -
Head Diameter
Between 0.427 inches and 0.447 inches -
Head Height
Between 0.089 inches and 0.099 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Screw Material
Steel comp 4037 or steel comp 8630 -
Screw Material Specification
Ams 6300 assn standard 1st material response or mil-s-6050 military specification 2nd material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-291-8584 MPN 1395AS1548Gun System Test Set
- 1680-01-551-1098 MPN 10055308Aircraft Mechanical Actuator
- 5975-01-398-1600 MPN 799E667Electrical-electronic Equipment Chassis
- 5305-00-060-9995 MPN 135B5367Shoulder Screw
- 5305-01-654-5790 MPN 406115Socket Head Cap Screw
- 5305-00-835-9160 MPN NAS1012-29AHexagon Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-135-7260 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AAS2525-19 | Accurate Prescision Fastener Corp. |
125C2525-19 | General Dynamics-ots, Inc. |