NSN 5305-01-136-8351
High Torque Screw
Between 2.051 inches and 2.081 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4D28 for national stock number 5305011368351.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-136-8351.
-
MPN or Model
HT4049-4D28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 2.051 inches and 2.081 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.928 inches first hole and 1.968 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-092-7211 MPN SC1777V08-7Machine Screw
- 5305-00-354-4292 MPN HT4024L3-19Close Tolerance Screw
- 5305-00-507-2176 MPN LS15265V4-12Close Tolerance Screw
- 5305-00-925-0478 MPN HT403A6-19Machine Screw
- 5305-01-050-3830 MPN HT4028L8-10MClose Tolerance Screw
- 5305-01-050-9001 MPN C7984-3-9Close Tolerance Screw
- 5305-01-143-4088 MPN HT4008-5-22Shoulder Screw
- 5305-01-147-6737 MPN HT4057-6-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-136-8351 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4D28 | Arconic Global Fasteners & Rings, |
HT4049-4D28 | Huck International, Inc. |
ST3M714-4D28 | Fastener Innovation Technology, Inc. |
WC4049-4D28 | West Coast Aerospace Inc |
HT4049-4D28 | Sps Technologies Ltd Tj Brooks |
HT4049-4D28 | Hi-shear Corporation |
HT4049-4D28 | Sps Technologies, Llc |
HT4049-4D28 | Lisi Aerospace Canada Corp |
ST3M714-4D28 | Alcoa Global Fasteners, Inc. |
ST3M714-4D28 | Boeing Company, The |
HT4049-4D28 | Huck Intl Inc |
HT4049-4D28 | Alcoa Global Fasteners, Inc. |