NSN 5305-01-139-6480
Bolt Stove
Between 1.188 inches and 1.250 inches fastener length, flat countersunk head style, between 0.694 inches and 0.762 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102-6-20 for national stock number 5305011396480.
Datasheet
-
Product description
Machine Screw NSN 5305-01-139-6480.
-
MPN or Model
NAS1102-6-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.945 inches and 1.090 inches -
Fastener Length
Between 1.188 inches and 1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.694 inches and 0.762 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1102 professional/industrial association standard
More from these suppliers
- 5940-01-425-6521 MPN NAS1063A15-406Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-007-1564 MPN NAS1100C06-7PMachine Screw
- 5305-00-051-4134 MPN MS24694C95Machine Screw
- 5305-00-052-8250 MPN NAS1351-08-8PSocket Head Cap Screw
- 5305-00-054-9229 MPN MS24694C117Machine Screw
- 5305-00-058-2068 MPN MS24677-10Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-139-6480 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102-6-20 | National Aerospace Standards |