NSN 5305-01-140-1391
High Torque Screw
Between 1.609 inches and 1.639 inches fastener length, flat countersunk head style, between 0.612 inches and 0.672 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number HT4041-7-17-9 for national stock number 5305011401391.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-140-1391.
-
MPN or Model
HT4041-7-17-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.537 inches and 0.587 inches -
Fastener Length
Between 1.609 inches and 1.639 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.612 inches and 0.672 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-601-8271 MPN 3MA583-6TClose Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-047-8822 MPN 53B336-6Close Tolerance Screw
- 5305-01-054-6291 MPN C7984-4-8Close Tolerance Screw
- 5305-01-131-2208 MPN HT4025L6-14Close Tolerance Screw
- 5305-01-185-7162 MPN LD111-0044-2304Close Tolerance Screw
- 5305-01-206-7259 MPN SC1779-4-4Close Tolerance Screw
- 5305-01-237-5116 MPN HT408A-4-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-140-1391 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-7-17-9 | Arconic Global Fasteners & Rings, |
HT4041-7-17-9 | Huck International, Inc. |
HT4041-7-17-9 | Hi-shear Corporation |
HT4041-7-17-9 | Sps Technologies, Llc |
HT4041-7-17-9 | Lisi Aerospace Canada Corp |
3M707-7-17-9 | Fastener Innovation Technology, Inc. |
11873-7-17-9 | Reid Products Inc. |
3M707-7-17-9 | West Coast Aerospace Inc |
3M707-7-17-9 | Alcoa Global Fasteners, Inc. |
3M707-7-17-9 | Boeing Company, The |
3M707-7-17-9 | Sps Technologies Inc |
HT4041-7-17-9 | Huck Intl Inc |
10115407 | Nimikkeistokeskus Ncb Finland |
HT4041-7-17-9 | Alcoa Global Fasteners, Inc. |
HT4041-7-17-9 | Sps Technologies, Llc |