NSN 5305-01-142-1174
High Torque Screw
Between 1.007 inches and 1.037 inches fastener length, flat countersunk head style, between 0.355 inches and 0.397 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number GB510CU4-10 for national stock number 5305011421174.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-142-1174.
-
MPN or Model
GB510CU4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 1.007 inches and 1.037 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-006-4371 MPN A51K56523-11Manual Reset Link
- 1560-00-018-3371 MPN 134AV25020-5Cockpit Lights Control Assembly
- 1560-00-065-2259 MPN 128P10492-1Scoop Assembly
- 5935-00-078-4882 MPN GC800KJC27-27SElectrical Plug Connector
- 1560-00-106-0493 MPN 123CSM10106-5Ru Fitting Assembly
- 1560-00-114-1694 MPN 123B10045-501Aircraft Access Door
- 4920-00-148-6898 MPN A32S2000Weapons Re Test Set
- 1680-00-163-6191 MPN A51M9006-11Slat Shaft Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-142-1174 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510CU4-10 | Hi-shear Corporation |
GB510CU4-10 | Lisi Aerospace Canada Corp |
GB510CU4-10 | Northrop Grumman Systems Corporation |
HT291-4-10 | Hi-shear Corporation |
GB510CU4-10 | Northrop Grumman Systems Corporation |
HT291-4-10 | Hi-shear Corporation |