NSN 5305-01-146-9762
Bolt Stove
Between 0.953 inches and 1.000 inches fastener length, flat countersunk head style, between 0.686 inches and 0.762 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS24694-C190 for national stock number 5305011469762.
Datasheet
-
Product description
Machine Screw NSN 5305-01-146-9762.
-
MPN or Model
MS24694-C190
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.656 inches and 0.735 inches -
Fastener Length
Between 0.953 inches and 1.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.686 inches and 0.762 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
85000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-451-2666 MPN NAS1063A10-105BQTerminal Board Marker Strip
- 5940-01-510-2082 MPN NAS1063A6Terminal Board Marker Strip
- 5305-00-038-2431 MPN NAS514P632-22Machine Screw
- 5305-00-051-2328 MPN MS51958-97Machine Screw
- 5305-00-052-8907 MPN MS24630-61Tapping Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-164-0081 MPN NAS1635-00-16Machine Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-146-9762 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694-C190 | National Aerospace Standards |
MS24694-C190 | Military Standards |
Stock Check
- NS: 9