NSN 5305-01-148-2653
High Torque Screw
Between 1.688 inches and 1.718 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4025L6-17 for national stock number 5305011482653.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-148-2653.
-
MPN or Model
HT4025L6-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 1.688 inches and 1.718 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-6936 MPN 1128CSM46504-13Close Tolerance Screw
- 5305-00-357-1868 MPN HT4028L4-6Close Tolerance Screw
- 5305-00-440-7302 MPN VT1051-4-5Close Tolerance Screw
- 5305-01-141-7918 MPN HT4010-7-17Shoulder Screw
- 5305-01-158-6248 MPN ST3M455-9DL45Close Tolerance Screw
- 5305-01-211-7485 MPN SC1786R-3-02Close Tolerance Screw
- 5305-01-237-2782 MPN CHT4057-4-11Close Tolerance Screw
- 5305-01-303-6353 MPN SC1823-3-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-148-2653 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L6-17 | Sps Technologies, Llc |
HT4025L6-17 | Arconic Global Fasteners & Rings, |
HT4025L6-17 | Huck International, Inc. |
HT4025L6-17 | Hi-shear Corporation |
ST3M454-6L17 | Boeing Company, The |
HT4025L6-17 | Lisi Aerospace Canada Corp |
11905-6L17 | Reid Products Inc. |
ST3M454-6L17 | Sps Technologies Ltd Tj Brooks |
ST3M454-6L17 | Sps Technologies Inc |
HT4025L6-17 | Huck Intl Inc |
10115448 | Nimikkeistokeskus Ncb Finland |
HT4025L6-17 | Alcoa Global Fasteners, Inc. |