NSN 5305-01-148-5915
Tap Bolt
Between 58.10 millimeters and 60.00 millimeters fastener length, between 6.17 millimeters and 6.63 millimeters head height, between 14.7 millimeters and 15.0 millimeters width between flats, thread diameter: 10.0 millimeters.
Manufacturer part number 15728526 for national stock number 5305011485915.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-148-5915.
-
MPN or Model
15728526
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
Between 29.1 millimeters and 38.5 millimeters -
Fastener Length
Between 58.10 millimeters and 60.00 millimeters -
Head Height
Between 6.17 millimeters and 6.63 millimeters -
Width Between Flats
Between 14.7 millimeters and 15.0 millimeters -
Thread Diameter
10.0 millimeters -
Thread Pitch In Millimeters
1.5 -
Material
Steel -
Material Specification
Gm 500-m 9.8 fscm 11862 mfr ref single material response -
Surface Treatment
Phosphate -
Surface Treatment Specification
Gm 6174-m fscm 11862 mfr ref single treatment response -
Thread Series Designator
M
More from these suppliers
- 5945-00-841-3254 MPN 1941113Solenoid Plunger
- 5305-01-167-8334 MPN 11503445Tapping Screw
- 5306-01-185-7048 MPN 11513606Machine Bolt
- 5975-00-308-2200 MPN 1916572Dust And Moisture Seal Boot
- 4920-00-707-4598 MPN T27321Electromechanical Actuator Testing Machine
- 5305-00-010-0822 MPN 100822Machine Screw
- 5305-00-753-4161 MPN 272473Hexagon Head Cap Screw
- 5305-00-832-7716 MPN 2289915Screw Throttle Body
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-148-5915 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
15728526 | General Motors Llc |
11505068 | General Motors Corp |
11509265 | General Motors Corp |
11504599 | General Motors Corp |
11505068 | General Motors Llc |
11509265 | General Motors Llc |