NSN 5305-01-148-5916
High Torque Screw
Between 0.861 inches and 0.891 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number H185-5-6 for national stock number 5305011485916.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-148-5916.
-
MPN or Model
H185-5-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 0.861 inches and 0.891 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-152-5307 MPN AIC1023V6-22Close Tolerance Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-354-4237 MPN HT4024L3-10Close Tolerance Screw
- 5305-00-505-3954 MPN LS15267V3-26Machine Screw
- 5305-00-916-4615 MPN AIC1023H6-26Close Tolerance Screw
- 5305-01-062-3334 MPN NAS1101-06H10BMachine Screw
- 5305-01-136-7435 MPN NAS1101E06-16Machine Screw
- 5305-01-290-7453 MPN AIC9535-8-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-148-5916 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H185-5-6 | Huck International, Inc. |
121558-5A6P | Sps Technologies, Llc |
AIC985-5-6 | Sps Technologies, Llc |
VT1694F-5-6 | Arconic Global Fasteners & Rings, |
PBF1166-5-6 | Sps Technologies, Llc |
121558-5A6P | Sps Technologies, Llc |
VT1694F5-6 | Alcoa Global Fasteners, Inc. |
C7985-5-6 | Lockheed Martin Corporation |
C7985-5-6 | Huck International, Inc. |
AIC985-5-6P | Sps Technologies, Llc |