NSN 5305-01-148-7466
High Torque Screw
Between 0.751 inches and 0.781 inches fastener length, flat countersunk head style, between 0.691 inches and 0.765 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number BACB30LU6-3 for national stock number 5305011487466.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-148-7466.
-
MPN or Model
BACB30LU6-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 0.751 inches and 0.781 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.691 inches and 0.765 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-143-9574 MPN NAS1101-08H22Machine Screw
- 5305-00-151-7974 MPN CVC241-3-16Machine Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-486-2290 MPN C082-4-21Close Tolerance Screw
- 5305-01-054-4624 MPN AIC9535-7-21Close Tolerance Screw
- 5305-01-070-6441 MPN 965812-409CMachine Screw
- 5305-01-076-3155 MPN NAS1101-06-20Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-148-7466 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU6-3 | Huck International, Inc. |
BACB30LU6-3 | Federal Manufacturing Corporation |
BACB30LU6-3 | Sps Technologies, Llc |
BACB30LU6-3 | Arconic Global Fasteners & Rings, |
BACB30LU6-3 | Sps Technologies, Llc |
BACB30LU6-3 | Sps Technologies, Llc |
BACB30LU6-3 | The Boeing Company |
BACB30LU6-3 | Alcoa Global Fasteners, Inc. |
BACB30LU6-3 | Huck Intl Inc |
BACB30LU6-3 | Sps Technologies, Llc |