NSN 5305-01-149-7772
Bolt Stove
Between 0.365 inches and 0.385 inches fastener length, hexagon head style, between 0.080 inches and 0.093 inches head height, width between flats: between 0.244 inches and 0.250 inches .
Manufacturer part number SM-C-808819-1 for national stock number 5305011497772.
Datasheet
-
Product description
Machine Screw NSN 5305-01-149-7772.
-
MPN or Model
SM-C-808819-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.303 inches and 0.385 inches -
Fastener Length
Between 0.365 inches and 0.385 inches -
Head Style
Hexagon -
Head Height
Between 0.080 inches and 0.093 inches -
Width Between Flats
Between 0.244 inches and 0.250 inches -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 384 or steel comp 302b or steel comp 303 plus x or steel comp 303se or steel comp 303cu or steel comp 303ma or steel comp 303pb or steel comp 304l or steel comp 348 -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-111-4744 MPN SM-D-2016061-39Composition Fixed Resistor
- 5930-00-179-4575 MPN SCB614636Dust And Moisture Seal Boot
- 5935-00-192-4789 MPN SCD84552-10Telephone Jack
- 5985-00-243-0432 MPN SC-C-35370Antenna
- 5935-00-257-9365 MPN SCB2969Electrical Receptacle Connector
- 5985-00-269-8267 MPN SM-D-748754Waveguide Assembly
- 5940-00-282-9557 MPN SM-B-503416Quick Disconnect Terminal
- 5905-00-283-3577 MPN SCC24406-17Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-149-7772 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SM-C-808819-1 | Us Army Communications & |