NSN 5305-01-152-0579
Panel Screw
0.410 inches fastener length, fillister head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number 7209550-002 for national stock number 5305011520579.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-152-0579.
-
MPN or Model
7209550-002
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.150 inches -
Fastener Length
0.410 inches -
Head Style
Fillister -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
First Diameter From Head
0.078 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
480 pounds per square inch -
Askewed Head Angle
90.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5945-01-112-7144 MPN 7603725Solenoid Plunger
- 5975-01-223-9704 MPN 7958703-003Electrical Equipment Cabinet Case
- 5935-01-433-9655 MPN 81285-03Electrical Receptacle Connector
- 6145-01-632-9315 MPN SMLH8A6U00Electrical Special Purpose Cable
- 5940-00-007-5277 MPN 10132205Lug Terminal
- 5905-00-243-1912 MPN 10163976Film Fixed Resistor
- 5905-00-262-5263 MPN 10120633Film Fixed Resistor
- 5905-00-305-8818 MPN 10120721Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-152-0579 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7209550-002 | Ge Aviation Systems Llc |
7209550-002 | Nyf/new York Fasteners/corp |
10115461 | Nimikkeistokeskus Ncb Finland |