NSN 5305-01-152-2594
High Torque Screw
Between 1.204 inches and 1.234 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1580A6H10 for national stock number 5305011522594.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-152-2594.
-
MPN or Model
NAS1580A6H10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.569 inches and 0.619 inches -
Fastener Length
Between 1.204 inches and 1.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-051-2325 MPN MS51958-94Machine Screw
- 5305-00-074-4436 MPN NAS623-5-6Machine Screw
- 5305-00-145-0967 MPN NAS1101E08-36Machine Screw
- 5305-00-184-8298 MPN NAS1189E04P7LKSocket Head Cap Screw
- 5305-00-269-4209 MPN MS24694S151Machine Screw
- 5305-00-271-7718 MPN NAS222-40Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-152-2594 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |
NAS1580A6H10 | National Aerospace Standards |