NSN 5305-01-152-8651
High Torque Screw
Between 0.817 inches and 0.847 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number 122011P3 for national stock number 5305011528651.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-152-8651.
-
MPN or Model
122011P3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.817 inches and 0.847 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Single Shear Strength
108000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5735 federal specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2, code p federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-107-1989 MPN NAS1189-04P3Socket Head Cap Screw
- 5305-00-121-3564 MPN 106466-4-16Close Tolerance Screw
- 5305-00-414-2576 MPN 3MFRA1506-18TClose Tolerance Screw
- 5305-00-463-0347 MPN NAS1101C04-16Machine Screw
- 5305-00-842-0320 MPN NAS1190-3P12LSocket Head Cap Screw
- 5305-01-010-2364 MPN HT4-16-4-7XShoulder Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-025-6408 MPN 106752-02-106CMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-152-8651 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
122011P3 | Sps Technologies, Llc |