1-321-802-5889

NSN 5305-01-156-5118

High Torque Screw

About this product

Between 1.391 inches and 1.421 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .

Manufacturer part number HT4057-3-16 for national stock number 5305011565118.

Picture of NSN 5305-01-156-5118

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-156-5118.

  • MPN or Model

    HT4057-3-16

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.381 inches and 0.431 inches
  • Fastener Length
    Between 1.391 inches and 1.421 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.338 inches and 0.381 inches
  • Grip Diameter
    Between 0.1885 inches and 0.1895 inches
  • Internal Drive Style
    High-torque
  • Thread Diameter
    0.190 inches
  • Grip Length
    Between 0.990 inches and 1.010 inches
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    125000 pounds per square inch
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Material
    Stainless steel
  • Material Specification
    23-112 type c fscm 76301 mfr ref single material response
  • Surface Treatment
    Aluminum and chromate
  • Surface Treatment Specification
    Mil-c-83488 type2 class 3 military specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-156-5118 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305011565118

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
HT4057-3-16 Sps Technologies, Llc
HT4057-3-16 Hi-shear Corporation
ST3M733-6L16 Arconic Global Fasteners & Rings,
ST3M733-6L16 Huck International, Inc.
ST3M733-6L16 Sps Technologies, Llc
ST3M733-6L16 Fastener Innovation Technology, Inc.
ST3M733-6L16 Hi-shear Corporation
ST3M733-6L16 West Coast Aerospace Inc
ST3M733-3L16 Sps Technologies, Llc
ST3M733-6L16 Lisi Aerospace Canada Corp
ST3M733-3L16 Boeing Company, The
HT4057-3-16 Arconic Global Fasteners & Rings,
HT4057-3-16 Lisi Aerospace Canada Corp
ST3M733-6L16 Sps Technologies Ltd Tj Brooks
ST3M733-6L16 Sps Technologies Inc
HT4057-3-16 Huck Intl Inc
HT4057-3-16 Alcoa Global Fasteners, Inc.
HT4057-3-16 Huck International, Inc.
ST3M733-3-16 Boeing Company, The
Stock Check
Availability for this item was last checked on 01/03/24. The quantities and conditions available at the time were:
  • NS: 25