NSN 5305-01-157-3378
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B627 for national stock number 5305011573378.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-157-3378.
-
MPN or Model
MS3369B627
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.351 inches and 0.402 inches -
Fastener Length
Between 2.226 inches and 2.246 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
Between 1.688 inches and 1.704 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.109 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-055-8209 MPN MS3116J14-5SElectrical Plug Connector
- 5935-00-140-0073 MPN MS3119E16-26YConnector Adapter
- 5935-00-148-4733 MPN MS24266R24B57S6Electrical Plug Connector
- 5935-00-149-3213 MPN MS3100A14S2SElectrical Receptacle Connector
- 5935-00-156-0253 MPN M21097-13-05Electrical Receptacle Connector
- 5935-00-172-8228 MPN MS24264G22T55S10Electrical Receptacle Connector
- 5935-00-196-2237 MPN MS3106A18-20SElectrical Plug Connector
- 5935-00-196-6829 MPN MS27511B22CElectrical Connector Cover
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-157-3378 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B627 | Military Standards |