NSN 5305-01-159-0093
High Torque Screw
Between 14.7 millimeters and 15.3 millimeters fastener length, oval countersunk head style, 7.0 millimeters head diameter, grip diameter: between 4.9650 millimeters and 4.9900 millimeters .
Manufacturer part number NA0123-050006 for national stock number 5305011590093.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-159-0093.
-
MPN or Model
NA0123-050006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
9.0 millimeters -
Fastener Length
Between 14.7 millimeters and 15.3 millimeters -
Head Style
Oval countersunk -
Head Diameter
7.0 millimeters -
Grip Diameter
Between 4.9650 millimeters and 4.9900 millimeters -
Single Shear Strength
660 megapascals -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
5.0 millimeters -
Grip Length
6.00 millimeters -
Min. Tensile Strength (psi)
13900 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
0.8 -
External Thread Tolerance Class
4h6h -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5935-00-057-6009 MPN NAS1196-8Receptacle Dummy Connector
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5975-01-615-9827 MPN 82-2830988-1Electronic Equipment Mounting Tray
- 5305-00-136-7445 MPN NAS1081-08D2NSetscrew
- 5305-00-177-5426 MPN NAS1181-1Close Tolerance Screw
- 5305-00-225-3839 MPN MS90725-8Hexagon Head Cap Screw
- 5305-00-253-7955 MPN NAS1191C04P4LSocket Head Cap Screw
- 5305-00-269-4205 MPN MS24694S147Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-159-0093 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0123-050006 | National Aerospace Standards |