NSN 5305-01-159-1139
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B537 for national stock number 5305011591139.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-159-1139.
-
MPN or Model
MS3369B537
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 2.790 inches and 2.810 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
End Application
Spec item -
Thread Diameter
0.312 inches -
Grip Length
Between 2.312 inches and 2.328 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.677 inches first hole and 2.697 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-151-9360 MPN MS35437-1Lug Terminal
- 5935-00-159-0120 MPN MS3410F14Electrical Connector Backshell
- 5935-00-163-3643 MPN MS27473T18B32PElectrical Plug Connector
- 5935-00-192-6336 MPN MS3106E14S7SCElectrical Plug Connector
- 5935-00-231-1734 MPN MS3106B28-22PElectrical Plug Connector
- 5935-00-235-8970 MPN MS27488-16Electrical Connector End Seal Plug
- 5935-00-259-0008 MPN MS3106E18-1PElectrical Plug Connector
- 5935-00-259-7438 MPN MS3106A32-13SElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-159-1139 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B537 | Military Standards |
MS3369B537 | Military Standards |