NSN 5305-01-160-2014
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B429 for national stock number 5305011602014.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-160-2014.
-
MPN or Model
MS3369B429
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.329 inches -
Fastener Length
Between 2.231 inches and 2.251 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.812 inches and 1.829 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.135 inches first hole and 2.155 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6214 MPN CA1170-08015Externally Relieved Body Screw
- 5305-00-853-4266 MPN CA2720-3-0420Shoulder Screw
- 5305-01-004-8104 MPN CA1450-08-02-1PPanel Screw Assembly
- 5305-01-052-1188 MPN CA2658-4-79Close Tolerance Screw
- 5305-01-614-9010 MPN CA28080-3-11PPanel Screw Assembly
- 5935-00-138-7601 MPN MS18180-1Electrical Connector Insert
- 5905-00-195-2296 MPN RP101RD351KKNonprecision Wire Wound Variable Resistor
- 5935-00-201-4158 MPN MS3100A12-5SElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-160-2014 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B429 | Military Standards |
CA2630-04-29 | Arconic Global Fasteners & Rings, |
CA2630-05-29 | Arconic Global Fasteners & Rings, |