NSN 5305-01-160-5702
High Torque Screw
Between 1.348 inches and 1.378 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number NAS1578A3T16 for national stock number 5305011605702.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-160-5702.
-
MPN or Model
NAS1578A3T16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.348 inches and 1.378 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp mt1020 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5935-01-589-4826 MPN NAS6606-50Electrical Receptacle Connector
- 5940-01-429-9493 MPN NAS1063A13-TBN1002Terminal Board Marker Strip
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-051-2326 MPN MS51958-95Machine Screw
- 5305-00-052-5926 MPN MS35198-74Machine Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
- 5305-00-113-6242 MPN NAS1191E08P8Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-160-5702 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A3T16 | National Aerospace Standards |