NSN 5305-01-160-6832
High Torque Screw
Between 0.683 inches and 0.713 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS4403-6 for national stock number 5305011606832.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-160-6832.
-
MPN or Model
NAS4403-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.683 inches and 0.713 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas4403 professional/industrial association standard
More from these suppliers
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 4920-01-536-8668 MPN NAS1213R10J84Airc Strap Assembly
- 5305-00-007-0208 MPN NAS1100E00-5Machine Screw
- 5305-00-009-0517 MPN NAS1393C00-7Machine Screw
- 5305-00-059-2498 MPN MS51976-63Setscrew
- 5305-00-088-9668 MPN MS24693-C54Machine Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-225-9102 MPN MS90726-47Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-160-6832 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4403-6 | National Aerospace Standards |
NAS4403-6 | National Aerospace Standards |
NAS4403-6 | National Aerospace Standards |
NAS4403-6 | National Aerospace Standards |