NSN 5305-01-160-7564
High Torque Screw
Between 0.598 inches and 0.628 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580V3H4 for national stock number 5305011607564.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-160-7564.
-
MPN or Model
NAS1580V3H4
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.598 inches and 0.628 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-83ASNFElectrical Receptacle Connector
- 5940-01-425-6508 MPN NAS1063A5-443Terminal Board Marker Strip
- 1680-01-544-9075 MPN NAS1375A16SA283Mater Aircraft Hose
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-058-4023 MPN MS24694S125Machine Screw
- 5305-00-151-5667 MPN NAS560HK2P6Machine Screw
- 5305-00-163-9847 MPN NAS1189E06P5Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-160-7564 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |
NAS1580V3H4 | National Aerospace Standards |