NSN 5305-01-161-2020
High Torque Screw
Between 0.472 inches and 0.502 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580C3T2P for national stock number 5305011612020.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-161-2020.
-
MPN or Model
NAS1580C3T2P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.472 inches and 0.502 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-355-3702 MPN AS50151Electrical Plug Connector
- 5930-01-622-7018 MPN MS24655-135Toggle Switch
- 5305-00-051-7087 MPN MS35203-16Machine Screw
- 5305-00-057-1679 MPN NAS1101-02-6Machine Screw
- 5305-00-057-1725 MPN NAS1101-08-5Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
- 5305-00-104-5076 MPN NAS1352-5LE56PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-161-2020 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3T2P | National Aerospace Standards |