NSN 5305-01-162-5713
High Torque Screw
Retaining elements in shank.
Manufacturer part number MS3369B-408 for national stock number 5305011625713.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-162-5713.
-
MPN or Model
MS3369B-408
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 0.918 inches and 0.938 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.500 inches and 0.516 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
90000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.823 inches first hole and 0.843 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-051-4532 MPN MS75008-45Radio Frequency Coil
- 5905-00-116-2394 MPN MS35350-75Composition Fixed Resistor
- 5935-00-134-0968 MPN MS16108-4DTip Jack
- 5935-00-140-6178 MPN MS27473T22B21PCElectrical Plug Connector
- 5935-00-235-8970 MPN MS27488-16-3Electrical Connector End Seal Plug
- 5935-00-270-1691 MPN MS27473E24B1PElectrical Plug Connector
- 5935-00-430-6976 MPN MS27467E25B19SElectrical Plug Connector
- 5935-00-456-8185 MPN MS27656E15F35SElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-162-5713 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B-408 | Military Standards |
MS369B408 | Hardman Inc |