NSN 5305-01-162-8533
High Torque Screw
Between 1.481 inches and 1.501 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number SS5105-417 for national stock number 5305011628533.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-162-8533.
-
MPN or Model
SS5105-417
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.403 inches and 0.439 inches -
Fastener Length
Between 1.481 inches and 1.501 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.078 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
53000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.395 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-110-3104 MPN 65205-08039-103Aircraft Access Cover
- 5950-00-161-0635 MPN 65550-12046-102Rotary Transformer
- 5930-00-163-4615 MPN 65351-11563Pressure Switch
- 1560-00-341-9779 MPN S1665-61637Servo Motor Control Block
- 1680-00-421-9971 MPN 65502-01006-041Cockpit Seat Tube
- 1680-00-480-8132 MPN 65651-05052-041Streami Winch Panel
- 1680-00-481-9705 MPN 65407-05031-101Towboom Fitting
- 1560-00-591-6591 MPN S1640-61250-1Bell Crank
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-162-8533 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5105-417 | Sikorsky Aircraft Corporation |
SS5105-417 | Avibank Mfg., Inc. |