NSN 5305-01-163-1983
High Torque Screw
Retaining element in shank.
Manufacturer part number MS21125A629 for national stock number 5305011631983.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-163-1983.
-
MPN or Model
MS21125A629
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.403 inches -
Fastener Length
Between 2.351 inches and 2.371 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.722 inches and 0.740 inches -
Head Height
Between 0.189 inches and 0.204 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
Between 1.812 inches and 1.828 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.223 inches first hole and 2.243 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-007-6172 MPN NAS1100C00-4Machine Screw
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
- 5305-00-008-7855 MPN NAS1100C04-22PMachine Screw
- 5305-00-052-6876 MPN MS24627-52Tapping Screw
- 5305-00-052-7391 MPN MS24627-1Tapping Screw
- 5305-00-052-9571 MPN NAS1351C04H4Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-163-1983 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21125A629 | National Aerospace Standards |
MS21125A629 | Military Standards |