NSN 5305-01-163-5788
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1578A3R2 for national stock number 5305011635788.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-163-5788.
-
MPN or Model
NAS1578A3R2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.337 inches and 0.387 inches -
Fastener Length
Between 0.472 inches and 0.502 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-83ASNFElectrical Receptacle Connector
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-051-0839 MPN MS51957-98Machine Screw
- 5305-00-051-2327 MPN NASM51958Machine Screw
- 5305-00-051-6532 MPN MS35190-349Machine Screw
- 5305-00-051-9135 MPN MS51958-111Machine Screw
- 5305-00-053-8550 MPN MS24693-S251Machine Screw
- 5305-00-054-4935 MPN NAS1300-3T12Thumbscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-163-5788 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A3R2 | National Aerospace Standards |
10115491 | Nimikkeistokeskus Ncb Finland |