NSN 5305-01-164-2330
High Torque Screw
Between 0.705 inches and 0.735 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, locking feature: patch threads.
Manufacturer part number BACB30LU3P6 for national stock number 5305011642330.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-164-2330.
-
MPN or Model
BACB30LU3P6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.705 inches and 0.735 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Locking Feature
Patch threads -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-090-6334 MPN BACB30LR4-17Close Tolerance Screw
- 5305-01-502-0059 MPN 3M1169C3-19AClose Tolerance Screw
- 5305-01-521-3266 MPN BACB30NT3K8Close Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-01-010-2346 MPN VEP220121-6F-17Shear Bolt
- 5306-01-043-0010 MPN VEPS156121-5V17Shear Bolt
- 5306-01-045-2884 MPN ST3M607-6-10Shoulder Bolt
- 5306-01-054-3423 MPN VCG0009L6-20Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-164-2330 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU3P6 | Huck International, Inc. |
BACB30LU3P6 | Valley-todeco, Inc. |
BACB30LU3P6 | Federal Manufacturing Corporation |
BACB30LU3P6 | Sps Technologies, Llc |
BACB30LU3P6 | Arconic Global Fasteners & Rings, |
BACB30LU3P6 | Sps Technologies, Llc |
BACB30LU3P6 | Sonic Industries Inc. |
BACB30LU3P6 | Sps Technologies, Llc |
BACB30LU3P6 | The Boeing Company |
BACB30LU3P6 | Alcoa Global Fasteners, Inc. |
BACB30LU3P6 | Huck Intl Inc |
BACB30LU3P6 | Sps Technologies, Llc |