NSN 5305-01-165-1964
High Torque Screw
1.188 inches fastener length, flat countersunk head style, 0.381 inches head diameter, grip diameter: 0.1885 inches .
Manufacturer part number 53B333-19 for national stock number 5305011651964.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-1964.
-
MPN or Model
53B333-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
1.188 inches -
Head Style
Flat countersunk -
Head Diameter
0.381 inches -
Grip Diameter
0.1885 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.682 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-145-2884 MPN 14-27227-7Flap Hinge Cover
- 1560-00-284-2518 MPN 3-73204-3Horizontal Tail Feel Spring Stop
- 1560-00-777-4441 MPN 2-24137-601Wing Tip Splice Strap Assembly
- 1560-00-791-1043 MPN 2-73364-3Turnbuckle N Barrel
- 1560-01-013-5942 MPN 18-73033-1Horizontal Tail Torque Tube
- 1560-01-016-0547 MPN 6-73754-1Aircraft Control Surface Fairing
- 1560-01-103-3054 MPN 6-10790-28Aircraft Access Door
- 5940-01-140-1121 MPN 98T103ATerminal Board
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-1964 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B333-19 | Northrop Grumman Technical Services, |
53B333-19 | Northrop Grumman Systems Corporation |