NSN 5305-01-165-2432
Bolt Stove
Between 0.328 inches and 0.375 inches fastener length, flat countersunk head style, between 0.283 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS24694-A2 for national stock number 5305011652432.
Datasheet
-
Product description
Machine Screw NSN 5305-01-165-2432.
-
MPN or Model
MS24694-A2
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.203 inches and 0.281 inches -
Fastener Length
Between 0.328 inches and 0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.283 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Aluminum alloy 2024 -
Screw Material Specification
Qq-a-430 federal specification single material response or qq-a-225, t4 federal specification single material response -
Screw Surface Treatment
Anodize -
Screw Surface Treatment Specification
Mil-a-8625, type 1 or 2 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-520-8570 MPN NAS1641R12T12SNElectrical Receptacle Connector
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-005-0657 MPN NAS1154E21Close Tolerance Screw
- 5305-00-008-9058 MPN NAS1102C04-3PMachine Screw
- 5305-00-051-2325 MPN NASM51958Machine Screw
- 5305-00-052-7483 MPN MS35198-85Machine Screw
- 5305-00-058-9392 MPN MS51977-77Setscrew
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-165-2432 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24694-A2 | National Aerospace Standards |
MS24694-A2 | Military Standards |