NSN 5305-01-165-2461
High Torque Screw
Retaining element in shank.
Manufacturer part number AS301-4-16 for national stock number 5305011652461.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-2461.
-
MPN or Model
AS301-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.344 inches and 0.395 inches -
Fastener Length
Between 1.490 inches and 1.510 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.507 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 1.000 inches and 1.016 inches -
Width Across Flats
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.391 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-081-6240 MPN 3MA583-17Machine Screw
- 5305-00-367-5444 MPN ST3M547-4-15Shoulder Screw
- 5305-00-390-0588 MPN NAS1101E4H12Machine Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-932-3904 MPN HT4V-4Machine Screw
- 5305-01-043-1857 MPN NAS1221-3V20Machine Screw
- 5305-01-044-0732 MPN NAS1189E08P10HNKSocket Head Cap Screw
- 5305-01-141-7197 MPN 3M902C5-21AShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-2461 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS301-4-16 | Avibank Mfg., Inc. |
LB35-4-16 | Hi-shear Corporation |
LB35-4-16 | Lisi Aerospace Canada Corp |
ST3M791C4-16 | Boeing Company, The |
10115501 | Nimikkeistokeskus Ncb Finland |