NSN 5305-01-165-5594
High Torque Screw
Two keyways along threads 180 degree apart,length of keyways 0.357 in..
Manufacturer part number CA21062-06-2-7 for national stock number 5305011655594.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-5594.
-
MPN or Model
CA21062-06-2-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.275 inches -
Fastener Length
0.437 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 302 or steel comp 304 or steel comp 305 or steel comp 304l or steel comp 310 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 309 -
Material Specification
Qq-s-763 federal specification all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-876-6545 MPN 8087323Electrical Connector Cover
- 4920-01-307-2508 MPN 717751505-009Subassembly Cradle
- 5950-01-399-4019 MPN 728010786-019Pulse Transformer
- 5935-01-222-1239 MPN 13083962-69Self-test Connector
- 5935-01-222-1224 MPN 13083962-139Self-test Connector
- 5935-01-222-1126 MPN 13083963-129Self-test Connector
- 5935-01-222-1192 MPN 13082482-89Self-test Connector
- 1680-01-535-6804 MPN CA17248-6-8-2Turnlock Receptacle
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-5594 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA21062-06-2-7 | Arconic Global Fasteners & Rings, |
717801702-001 | Lockheed Martin Corporation |