NSN 5305-01-165-7546
High Torque Screw
Between 0.948 inches and 0.978 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number ST3M730-3L10 for national stock number 5305011657546.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-7546.
-
MPN or Model
ST3M730-3L10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.948 inches and 0.978 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3481 MPN HT4024L6-23Close Tolerance Screw
- 5305-00-505-2719 MPN LS15262V06-7Machine Screw
- 5305-00-805-3839 MPN 51B221-9HMachine Screw
- 5305-00-925-0641 MPN VS2681-013Machine Screw
- 5305-01-027-2004 MPN HT8137-3-13Close Tolerance Screw
- 5305-01-052-9815 MPN C7984-5-10PClose Tolerance Screw
- 5305-01-076-4931 MPN HT4020-5-10AXShoulder Screw
- 5305-01-118-4927 MPN GB510CE3-29Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-7546 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M730-3L10 | Hi-shear Corporation |
ST3M730-3L10 | Lisi Aerospace Canada Corp |
ST3M730-3L10 | Arconic Global Fasteners & Rings, |
ST3M730-3L10 | Huck International, Inc. |
ST3M730-3L10 | Fastener Innovation Technology, Inc. |
ST3M730-3L10 | West Coast Aerospace Inc |
ST3M730-3L10 | Sps Technologies, Llc |
ST3M730-3L10 | Sps Technologies Ltd Tj Brooks |
ST3M730-3L10 | Boeing Company, The |
ST3M730-3L10 | Sps Technologies Inc |
HT4054-3-10A | Huck Intl Inc |
HT4054-3-10A | Hi-shear Corporation |
HT4054-3-10A | Sps Technologies, Llc |
HT4054-3-10A | Alcoa Global Fasteners, Inc. |
HT4054-3-10A | Huck International, Inc. |
ST3M730-3-10 | Alcoa Global Fasteners, Inc. |