NSN 5305-01-165-7548
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, locking feature: strip threads.
Manufacturer part number NAS1163E7LK for national stock number 5305011657548.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-165-7548.
-
MPN or Model
NAS1163E7LK
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
10.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Locking Feature
Strip threads -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Plastic locking feature -
Material Specification
Ams5737 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response fastener -
Thread Series Designator
Unjf -
Specification Data
80205-nas1163 professional/industrial association standard
More from these suppliers
- 5305-00-046-7439 MPN NAS1151C-23Close Tolerance Screw
- 5305-00-057-0537 MPN MS51958-53Machine Screw
- 5305-00-058-5145 MPN NAS514P440-12PMachine Screw
- 5305-00-060-7858 MPN NAS1081-08A3Setscrew
- 5305-00-116-5024 MPN NAS1100C6-16Machine Screw
- 5305-00-132-6912 MPN MS27039DD4-19Machine Screw
- 5305-00-142-3449 MPN MS18064-36Setscrew
- 5305-00-211-5508 MPN NAS1352C04H6PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-165-7548 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1163E7LK | National Aerospace Standards |