NSN 5305-01-166-6139
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B522 for national stock number 5305011666139.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-166-6139.
-
MPN or Model
MS3369B522
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.357 inches -
Fastener Length
Between 1.853 inches and 1.873 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 1.375 inches and 1.391 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.677 inches first hole and 1.697 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5940-00-688-6002 MPN NAS707S3Stud Terminal
- 5940-01-454-0311 MPN NAS1063A6-510ALTerminal Board Marker Strip
- 5305-00-007-6182 MPN NAS1100C04-10PMachine Screw
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-021-3969 MPN MS35308-109Hexagon Head Cap Screw
- 5305-00-058-9362 MPN MS51977-19Setscrew
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-166-6139 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B522 | National Aerospace Standards |
MS3369B522 | Military Standards |