NSN 5305-01-167-9331
High Torque Screw
Keyways 1.181 in. Min and 1.211 in. Max long,0.040 in. Min and 0.044 in. Max wide machined in shank bore machined in thread end to receive plug.
Manufacturer part number CA2194-4-12 for national stock number 5305011679331.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-167-9331.
-
MPN or Model
CA2194-4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.276 inches and 1.296 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.355 inches and 0.397 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Width Across Flats
Between 0.1565 inches and 0.1587 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-9543 MPN CA2820 10SPanel Screw Assembly
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-014-1419 MPN CA2658-5-39Close Tolerance Screw
- 5305-01-621-7132 MPN CA2193-3-09Close Tolerance Screw
- 5306-00-121-8844 MPN CA4510-4-10Close Tolerance Bolt
- 1560-00-196-3989 MPN 140-54011Aircraft Fairing
- 1560-00-327-3031 MPN 172-21100Aircraft Structural Plate
- 1680-00-477-9631 MPN 159-53011Cushion Assy-pilot
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-167-9331 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2194-4-12 | Arconic Global Fasteners & Rings, |
FIT01-0003-4012 | Fastener Innovation Technology, Inc. |
LE111-0003-4012 | Fastener Innovation Technology, Inc. |
LE111-0003-4012 | Boeing Company, The |