NSN 5305-01-168-1751
High Torque Screw
Between 1.320 inches and 1.350 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-0415 for national stock number 5305011681751.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-168-1751.
-
MPN or Model
LD111-0044-0415
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.331 inches and 0.397 inches -
Fastener Length
Between 1.320 inches and 1.350 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-030-5639 MPN 191-51171Aircraft Structural Component Bracket
- 1560-00-040-8768 MPN 192-51113-5Pitot Fitting Assembly
- 1560-00-185-3466 MPN 52-31109-1Fuselage Ho Fitting
- 1560-01-151-3116 MPN L2400003-081Aircraft Rudder
- 5930-01-180-9566 MPN L5303482-001Push-pull Switch
- 5935-01-192-8585 MPN ES27484T10F99SElectrical Plug Connector
- 1560-01-194-9721 MPN L3223649-031Aircraft Structural Plate
- 1680-01-206-9807 MPN L5301335-061Electrical-electronic Equipment Control Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-168-1751 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0415 | Boeing Company, The |
LD111-0029-0415 | Boeing Company, The |