NSN 5305-01-169-0017
High Torque Screw
Between 1.007 inches and 1.037 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-2410 for national stock number 5305011690017.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-169-0017.
-
MPN or Model
LD111-0044-2410
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 1.007 inches and 1.037 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 ph13-8 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2669 MPN LS15262V3-36Machine Screw
- 5305-01-435-5755 MPN BACB30LU8-28Close Tolerance Screw
- 5305-01-462-2726 MPN 3M1169V4-12AClose Tolerance Screw
- 5305-01-512-8414 MPN 3M1170C3-7AFClose Tolerance Screw
- 5306-00-111-4165 MPN 9688M01P01Shoulder Bolt
- 5306-00-900-5282 MPN MS21250-05066Shear Bolt
- 5306-01-068-1870 MPN MS21250-04030Shear Bolt
- 5306-01-075-9456 MPN J404P07BMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-169-0017 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2410 | Boeing Company, The |
LD111-0044-2410 | Sps Technologies, Llc |
LD111-0044-2410 | Valley-todeco, Inc. |
LD111-0044-2410 | Huck International, Inc. |
LD111-0044-2410 | J.w. Manufacturing, Inc |
LD111-0044-2410 | Sps Technologies, Llc |
LD111-0044-2410 | Sps Technologies, Llc |
LD111-0044-2410 | Sonic Industries Inc. |
LD111-0044-2410 | Hi-shear Corporation |
LD111-0044-2410 | Sps Technologies, Llc |
LD111-0044-2410 | Alcoa Global Fasteners, Inc. |
LD111-0044-2410 | Lisi Aerospace Canada Corp |