NSN 5305-01-169-2901
Bolt Stove
Between 0.766 inches and 0.813 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number MS27039-DD4-12 for national stock number 5305011692901.
Datasheet
-
Product description
Machine Screw NSN 5305-01-169-2901.
-
MPN or Model
MS27039-DD4-12
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
013680 - Alum Screws -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.501 inches and 0.568 inches -
Fastener Length
Between 0.766 inches and 0.813 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Screw Material
Aluminum alloy 2024 -
Screw Material Specification
Mil-w-7986 military specification 1st material response or qq-a-268 federal specification 2nd material response -
Screw Surface Treatment
Anodize -
Screw Surface Treatment Specification
Mil-a-8625 type 1 or type 2 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-923-4493 MPN NAS1745-4Conductor Splice
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5940-01-659-5465 MPN NAS1063A4-138LTerminal Board Marker Strip
- 5305-00-003-8158 MPN NAS1351-5-12PSocket Head Cap Screw
- 5305-00-044-4247 MPN NAS1632-2Machine Screw
- 5305-00-051-2324 MPN NASM51958Machine Screw
- 5305-00-074-4517 MPN NAS1156-9Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-169-2901 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27039-DD4-12 | National Aerospace Standards |
MS27039-DD4-12 | Military Standards |