NSN 5305-01-169-7211
High Torque Screw
Between 1.507 inches and 1.537 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-2418 for national stock number 5305011697211.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-169-7211.
-
MPN or Model
LD111-0044-2418
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 1.507 inches and 1.537 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams-5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-580-6339 MPN BACB30LU06-3Close Tolerance Screw
- 5305-01-175-3672 MPN BACB30LU8-20XShoulder Screw
- 5305-01-412-5361 MPN LD111-0044-0812Close Tolerance Screw
- 5305-01-462-2742 MPN ST3M652C6-23AClose Tolerance Screw
- 5306-00-144-0300 MPN MS21250-05044Shear Bolt
- 5306-00-815-4968 MPN 3M33-3-3Close Tolerance Bolt
- 5306-01-018-5588 MPN VFK100G-08076Shear Bolt
- 5306-01-042-8827 MPN BACB30LM8DU30Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-169-7211 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2418 | Boeing Company, The |
LD111-0044-2418 | Sps Technologies, Llc |
LD111-0044-2418 | Arconic Global Fasteners & Rings, |
LD111-0044-2418 | Huck International, Inc. |
LD111-0044-2418 | J.w. Manufacturing, Inc |
LD111-0044-2418 | Sps Technologies, Llc |
LD111-0044-2418 | Abounding Security Inc |
LD111-0044-2418 | Sps Technologies, Llc |
LD111-0044-2418 | Sonic Industries Inc. |
LD111-0044-2418 | Hi-shear Corporation |
LD111-0044-2418 | Sps Technologies, Llc |
LD111-0044-2418 | Lisi Aerospace Canada Corp |
LD111-0044-2418 | Valley-todeco, Inc. |