NSN 5305-01-170-4569
High Torque Screw
Between 0.954 inches and 0.984 inches fastener length, flat countersunk head style, between 0.5149 inches and 0.5662 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1581F6T6 for national stock number 5305011704569.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-170-4569.
-
MPN or Model
NAS1581F6T6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.569 inches and 0.619 inches -
Fastener Length
Between 0.954 inches and 0.984 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.5149 inches and 0.5662 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-00-763-6983 MPN NAS1196-13XReceptacle Dummy Connector
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-054-2265 MPN MS24678-59CSocket Head Cap Screw
- 5305-00-080-7385 MPN NAS1190C08P7LSocket Head Cap Screw
- 5305-00-082-1653 MPN NAS1352-202Socket Head Cap Screw
- 5305-00-108-9698 MPN MS21125-4-21Close Tolerance Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-170-4569 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |
NAS1581F6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |
NAS1581F6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |
NAS1581F6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |
NAS1581F6T6 | National Aerospace Standards |
NAS1581F6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |
NAS1581F6T6 | National Aerospace Standards |
NAS1581A6T6 | National Aerospace Standards |