NSN 5305-01-170-8492
High Torque Screw
Between 1.140 inches and 1.170 inches fastener length, flat countersunk head style, between 0.576 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number LD111-0044-0511 for national stock number 5305011708492.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-170-8492.
-
MPN or Model
LD111-0044-0511
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.482 inches -
Fastener Length
Between 1.140 inches and 1.170 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.576 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-455-7446 MPN AIC813-5-R16Machine Screw
- 5305-00-802-0578 MPN 51B221-13HMachine Screw
- 5305-00-803-9577 MPN 51B222-7Machine Screw
- 5305-00-915-4770 MPN NAS1101C4-22Machine Screw
- 5305-00-928-9635 MPN AIC82-5-15Machine Screw
- 5305-01-418-2002 MPN AIC4463-08-6Machine Screw
- 5305-01-433-1007 MPN HT4049-3-11Close Tolerance Screw
- 5305-01-434-0484 MPN TX1026C4-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-170-8492 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0511 | Boeing Company, The |
LD111-0044-0511 | Sps Technologies, Llc |
LD111-0044-0511 | Arconic Global Fasteners & Rings, |
LD111-0044-0511 | Sps Technologies, Llc |
LD111-0044-0511 | Sps Technologies, Llc |
LD111-0044-0511 | Sonic Industries Inc. |
LD111-0044-0511 | Hi-shear Corporation |
LD111-0044-0511 | Lisi Aerospace Canada Corp |
LD111-0029-0511 | Boeing Company, The |