NSN 5305-01-171-1440
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, oval countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number T181-2305 for national stock number 5305011711440.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-171-1440.
-
MPN or Model
T181-2305
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-0623 MPN 51B221-40Close Tolerance Screw
- 5305-00-316-7704 MPN AIC812-06-4Machine Screw
- 5305-00-328-9103 MPN AIC811-6-31Socket Head Cap Screw
- 5305-00-364-7308 MPN LS15267V3-20Machine Screw
- 5305-00-369-2088 MPN NAS1101E08-6Machine Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-055-3808 MPN BACB30LU3-23Close Tolerance Screw
- 5305-01-212-1987 MPN BACB30LU4P7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-171-1440 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
T181-2305 | Huck International, Inc. |
SC1786RV3-5 | Arconic Global Fasteners & Rings, |
PBF1383-2305 | Sps Technologies, Llc |
123179V3R5 | Sps Technologies, Llc |
LE111-0041-2305 | Boeing Company, The |
LE111-0041-2305 | Sps Technologies, Llc |
LE111-0041-2305 | Sonic Industries Inc. |
T181-2305 | Huck Intl Inc |