NSN 5305-01-171-3984
High Torque Screw
Between 2.011 inches and 2.041 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4049-3D28 for national stock number 5305011713984.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-171-3984.
-
MPN or Model
HT4049-3D28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 2.011 inches and 2.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.888 inches first hole and 1.928 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-9100 MPN NAS1191E04P20LSocket Head Cap Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-527-4567 MPN NAS334CPA7-5Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-01-045-3020 MPN HT4016-3-3YSocket Head Cap Screw
- 5305-01-047-1859 MPN LMH79-1284Panel Screw Assembly
- 5305-01-059-4881 MPN VT1693F5-16Close Tolerance Screw
- 5305-01-076-4931 MPN HT4020-5-10AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-171-3984 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-3D28 | Huck International, Inc. |
HT4049-3D28 | Hi-shear Corporation |
HT4049-3D28 | Sps Technologies, Llc |
ST3M714-3D28 | Boeing Company, The |
HT4049-3D28 | Alcoa Global Fasteners, Inc. |
HT4049-3D28 | Lisi Aerospace Canada Corp |
11931-3D28 | Reid Products Inc. |
HT4049-3D28 | Huck Intl Inc |
10115532 | Nimikkeistokeskus Ncb Finland |