NSN 5305-01-172-2549
High Torque Screw
Between 0.694 inches and 0.724 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-0405 for national stock number 5305011722549.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-172-2549.
-
MPN or Model
LD111-0044-0405
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.382 inches and 0.412 inches -
Fastener Length
Between 0.694 inches and 0.724 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9438 MPN HT4025L5D20Close Tolerance Screw
- 5305-00-965-0074 MPN SC2000A832-8Machine Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-139-0850 MPN HT4054-3D8AClose Tolerance Screw
- 5305-01-143-6539 MPN ST3M454-3L18Close Tolerance Screw
- 5305-01-158-6248 MPN ST3M455-9DL45Close Tolerance Screw
- 5305-01-165-7515 MPN VT1693F6-12Close Tolerance Screw
- 5305-01-424-1329 MPN 03A173-4-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-172-2549 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0405 | Boeing Company, The |
LD111-0044-0405 | Arconic Global Fasteners & Rings, |
LD111-0044-0405 | Sps Technologies, Llc |
LD111-0044-0405 | Sps Technologies, Llc |
LD111-0044-0405 | Sonic Industries Inc. |
LD111-0044-0405 | Hi-shear Corporation |
LD111-0044-0405 | Lisi Aerospace Canada Corp |
LD111-0029-0405 | Boeing Company, The |