NSN 5305-01-173-3578
High Torque Screw
Per b-1 engineering.
Manufacturer part number NAS1580V3R4 for national stock number 5305011733578.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-173-3578.
-
MPN or Model
NAS1580V3R4
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.598 inches and 0.628 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Feat -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams 4967 comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-280-1082 MPN NAS1745-6Conductor Splice
- 1560-01-424-2476 MPN NAS6704D27Aircraft Structural Component Support
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5305-00-004-2155 MPN NAS1351C5-16Socket Head Cap Screw
- 5305-00-007-2943 MPN NAS1100C06-9PMachine Screw
- 5305-00-007-9895 MPN NAS1102C04-12PMachine Screw
- 5305-00-057-0919 MPN NAS1219-04-6Machine Screw
- 5305-00-058-2067 MPN NAS135206H6PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-173-3578 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3R4 | National Aerospace Standards |
Stock Check
- NE: 15725
- NS: 786
- SV: 1