NSN 5305-01-174-5384
High Torque Screw
Between 5.765 inches and 5.812 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1889 inches and 0.1894 inches .
Manufacturer part number NAS333CPA56 for national stock number 5305011745384.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-174-5384.
-
MPN or Model
NAS333CPA56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.390 inches and 0.437 inches -
Fastener Length
Between 5.765 inches and 5.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Single Shear Strength
2620 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.1900 inches -
Grip Length
Between 5.365 inches and 5.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Thread Series Designator
Unf -
Specification Data
80205-nas333 professional/industrial association standard
More from these suppliers
- 5940-01-207-0227 MPN NAS1745-20Conductor Splice
- 5935-01-577-3543 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5305-00-067-9914 MPN MS24674-7Socket Head Cap Screw
- 5305-00-068-8432 MPN MS24667-10Socket Head Cap Screw
- 5305-00-082-1995 MPN NAS1352C02-3PSocket Head Cap Screw
- 5305-00-093-6688 MPN MS21125-0534Close Tolerance Screw
- 5305-00-134-8762 MPN NAS1402-15Machine Screw
- 5305-00-235-0379 MPN NAS1102E04-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-174-5384 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CPA56 | National Aerospace Standards |