NSN 5305-01-174-6541
High Torque Screw
Between 0.370 inches and 0.400 inches fastener length, pan no. 2 head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS5203PU1 for national stock number 5305011746541.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-174-6541.
-
MPN or Model
NAS5203PU1
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.370 inches and 0.400 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-444-8249 MPN NAS1063A2-107BUTerminal Board Marker Strip
- 5935-01-323-4640 MPN MS33687-24-10PElectrical Connector Insert
- 5305-00-042-9478 MPN MS90725-90Hexagon Head Cap Screw
- 5305-00-059-8280 MPN MS35214-55Machine Screw
- 5305-00-144-0399 MPN MS35307-383Hexagon Head Cap Screw
- 5305-00-144-0420 MPN MS35191-349Machine Screw
- 5305-00-144-0545 MPN NAS1101C3H16Machine Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-174-6541 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5203PU1 | National Aerospace Standards |