NSN 5305-01-175-3673
High Torque Screw
Includes nut.
Manufacturer part number LB35-4-15 for national stock number 5305011753673.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-175-3673.
-
MPN or Model
LB35-4-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.474 inches and 0.510 inches -
Fastener Length
Between 1.448 inches and 1.528 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.5018 inches and 0.5066 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.938 inches and 0.954 inches -
Width Across Flats
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.318 inches first hole and 1.324 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5787 MPN HT3A-9Machine Screw
- 5305-00-126-5143 MPN HT195-6-18Close Tolerance Screw
- 5305-00-170-0335 MPN HT184-4-10Close Tolerance Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-450-5954 MPN HR101V-5-19Close Tolerance Screw
- 5305-00-505-3356 MPN LS15237C4-2Close Tolerance Screw
- 5305-00-980-5259 MPN HT239PB3-8Machine Screw
- 5305-01-091-7929 MPN HT308-8-24Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-175-3673 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LB35-4-15 | Hi-shear Corporation |
LB35-4-15 | Lisi Aerospace Canada Corp |
ST3M791C4-15 | Avibank Mfg., Inc. |
ST3M791C4-15 | Boeing Company, The |
10115546 | Nimikkeistokeskus Ncb Finland |