NSN 5305-01-175-5376
High Torque Screw
Between 1.060 inches and 1.080 inches fastener length, crowned hexagon head style, between 0.095 inches and 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NASM3369B-311 for national stock number 5305011755376.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-175-5376.
-
MPN or Model
NASM3369B-311
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 1.060 inches and 1.080 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.688 inches and 0.704 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.971 inches first hole and 0.991 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-007-6182 MPN NAS1100C04-10PMachine Screw
- 5305-00-018-7513 MPN NAS1219-5-16PMachine Screw
- 5305-00-054-6668 MPN NAS1635-08-6PMachine Screw
- 5305-00-058-9377 MPN MS51977-49Setscrew
- 5305-00-059-3660 MPN MS51958-64Machine Screw
- 5305-00-068-0543 MPN MS24678-11Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-175-5376 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM3369B-311 | National Aerospace Standards |
MS3369B-311 | Military Standards |